Jump to content

Electric window not going fully down


julietdiane
 Share

Recommended Posts

Lupo TDi 1.4.

The drivers side windows only goes down 2/3rds of the way, otherwise the window goes up and down

with no problems. Any ideas?

I have put in new up/down window switches about 3 months ago.

Only stopped going fully down one week ago?

 

 

Link to comment
Share on other sites

Could be the loom within the door has come loose and is stopping the window fully opening - this happened to mine when I fixed the window cable, my loom is missing a few clips and was not sitting flush with the inner door skin, a strategically applied cable tie later and it was good again.

To check take the lower panel off,  in the area behind the speaker. hopefully its just clipping the loom back into place.

When you close it up make sure the splash membrane is taped up to stop water getting into the cabin.

Link to comment
Share on other sites

Thanks for the replies - Had the bottom panel off but the cable harness is not the problem. The windows stops short with a solid sounding clunk as if it was hitting something hard. I will have to take the top panel off and have a look. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.