Lupo Tom Lupo Posted March 25, 2019 Report Share Posted March 25, 2019 (edited) Hi, The driver's side washer jet isn't working, the passenger set seems to be very high pressure which suggests to me that the drivers side is blocked as opposed to leaking. I have used a small water pistol to send some high pressure water down the jet aperture, I've also tried a thin pointy nail fail but to no avail. I did try unclipping the jet from the bonnet to make sure nothing was leaking, I inspected it whilst the jets were operated and nothing happened. I assume that there is a very significant blockage and the remedy is to buy a new 'jet end' and clip in a new one in place of the old one? Also worth mentioning that from the washer bottle up to the bonnet there is only one hose but the connector on the bonnet has 2 ports? I feel as though it's always been this way but thought it might be something to include. I have searched this issue but all I found were multiple hits of the rear jet not working which I'm aware is usually due to the hose coming off. Cheers. Edited March 25, 2019 by Lupo Tom Lupo Quote Link to comment Share on other sites More sharing options...
weslangdon Posted March 25, 2019 Report Share Posted March 25, 2019 the trick is to add a bit of drain cleaner once a year to keep the jets clean but don't over do it as it will damage the paint on your bonnet of its not diluted Quote Link to comment Share on other sites More sharing options...
Sausage Posted March 25, 2019 Report Share Posted March 25, 2019 Sewing needle or pin up the hole (good for direction pointing of jet as well). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.