BioTriffid Posted January 3, 2019 Report Share Posted January 3, 2019 So today the car run and cut out for 2 - 3 seconds so I put a diagnostic on and the code P1570 immobiliser come up I cleared the code car run fine but then I turned it off and back on it come back with the same problem of cutting out so I took the battery off for 30 minutes it was clear again but has come back again any help possible any fixes I can do will be much appreciated thanks Quote Link to comment Share on other sites More sharing options...
mk2 Posted January 3, 2019 Report Share Posted January 3, 2019 Tried a backup key? Quote Link to comment Share on other sites More sharing options...
BioTriffid Posted January 3, 2019 Author Report Share Posted January 3, 2019 I don't have a back up key unfortunately Quote Link to comment Share on other sites More sharing options...
BioTriffid Posted January 3, 2019 Author Report Share Posted January 3, 2019 So the car is running but fine drives ok but pulling up to lights or junction it will. Start to judder and struggle to pull away also the revves get stuck in 2000rpm range but one's it gets up to speed it will run fine again. Quote Link to comment Share on other sites More sharing options...
mk2 Posted January 3, 2019 Report Share Posted January 3, 2019 That sounds like something else... not immob. Need more info. Quote Link to comment Share on other sites More sharing options...
BioTriffid Posted January 3, 2019 Author Report Share Posted January 3, 2019 Same fault code keeps coming up I'm gonna try another ecu and change a few sensors I'll keep looking into it if it keeps repeating Quote Link to comment Share on other sites More sharing options...
mk2 Posted January 3, 2019 Report Share Posted January 3, 2019 Detailed symptoms? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.