Jump to content
Sign in to follow this  
Adamp

1.4 16v 75bhp Spark plug gaps?

Recommended Posts

Does anyone know what the gap measurements should be? Replacing the plugs and not familiar with this engine. ( I tried the search but not joy) 

Cheers.

Share this post


Link to post
Share on other sites

Plug gaps are not as critical as people think... usually about 0.8mm does the trick. 0.6-2.0 will work. Plug temperature will affect performance though. I like to run a plug with a heat rating one hotter than standard. Means you can run a bit richer for fractionally more power when you remap- and no plug fouling. Nice clean plugs even when rich, because the extra heat prevents the soot from sticking. Changing plug leads and ends don't have any effect unless the original ones are faulty.

Share this post


Link to post
Share on other sites

Reasonably sure they come in the box with 1.0mm gap, but I'd be aiming at 0.8mm. gap increases with wear. A slightly hotter plug is a good idea too.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.