Dannynewport1978 Posted September 1, 2017 Report Share Posted September 1, 2017 I've stripped the engine bare & want to make up some silicone hoses but am wondering whether there is a simpler way to plumb it all in like cutting out certain pipework etc. I've heard about the breather removals etc & am hoping for a guide or advice. Quote Link to comment Share on other sites More sharing options...
Rich Posted September 1, 2017 Report Share Posted September 1, 2017 where is it going? Quote Link to comment Share on other sites More sharing options...
Dannynewport1978 Posted September 2, 2017 Author Report Share Posted September 2, 2017 (edited) 10 hours ago, Rich said: where is it going? In the front 4wd, just want to keep it tidy without any unnecessary piping. Edited September 2, 2017 by Dannynewport1978 Quote Link to comment Share on other sites More sharing options...
Rich Posted September 2, 2017 Report Share Posted September 2, 2017 you need to put it in before pipework. what about floors, are they necessary? Quote Link to comment Share on other sites More sharing options...
Dannynewport1978 Posted September 2, 2017 Author Report Share Posted September 2, 2017 I have an S3 rear subframe which I need to mount at the rear so the floor needed to come out anyway. I'll mount that with the RS4 diff in a cradle then run a shortened TT prop. I've noticed the original GTI subframe raises up in the middle leaving little space for the prop but from what I can see the 1.2TDI subframe is paralel from mount to mount which will leave me more tunnel space. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.