martinedwards Posted March 26, 2017 Report Share Posted March 26, 2017 I've never done the CAN-Bus thing before. I've pulled the RCD 200 from my fox. The Pioneer radio I have fitted in it's place has three wires in.... power + & - and the ignition line. the fox loom has 2 +, 1 - and two CAN-bus cables. I need EITHER a CAN-Bus adaptor which will give me power to the ignition line to turn the radio on, or run a separate line to the ignition. the cable to the ignition looks like a lot of work, so is there such a thing as a CAN-bus adaptor that will give me a signal out when the ignition is on, and nothing when its not, so that my radio will turn off when the car is turned off? Please help, cos this is driving me nuts! Quote Link to comment Share on other sites More sharing options...
lupogtiboy Posted March 27, 2017 Report Share Posted March 27, 2017 http://www.connects2.co.uk/Product/ProductItem/CTHUE-VW1 Quote Link to comment Share on other sites More sharing options...
martinedwards Posted March 27, 2017 Author Report Share Posted March 27, 2017 got two of them! there is a pair of extra wires and at least one of them needs to go to an ignition on/off feed. closest I can find without pulling the car apart is the ciggie lighter... I'll try that tonight..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.