Jump to content

Handbrake cable routing


Recommended Posts

Struggling with the driver's side handbrake cable, can't seem to get it out between the chassis and rear beam. Has the chassis bent? Has someone trapped it if changing the rear beam? Is it normal? 

IMG-20170225-WA0001_zpschw5bj42.jpg

IMG-20170225-WA0000_zpsdzkv0okn.jpg

Link to comment
Share on other sites

its trapped, the cable hangs from the little clip thats in the end of the beam, loosen the nut as its acting as a clamp, once loose you should be able to get the cable out

just look at mine and the cable is in amost exactly the same place, you can see your cable is not in the clip properly so somehow its worked its way up

i think using the jackstand on the rear beam is not helping, us another spot so the beam can drop it may free it up

Edited by Mobieus_uk
Link to comment
Share on other sites

Thanks :)

Yes was trapped, cut through the cable and managed to release it. (Can't see it working its way up there, someone must have removed the beam and it got snagged then ?)

2 new handbrake cables and it's all good again ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.