Jump to content

pop out windows?


randommandan
 Share

Recommended Posts

I fitted them to my GTI which did not have the fixings in the B pillar. I bought the blind nuts from VW dealer (about £1.25 each). You have to drill the B pillar to accept these fittings. They are hexagonal in section behind the flange. I found that drilling the hole slightly undersized then tapping the fixing into the hole and giving it a slight turn (literally 5 or 10 degrees) with pliers locked it in place. It does not seam enough but it has worked for me. 

To set out the correct position of the holes I used my other car as a pattern - which is not too helpful for others I know! I think I have a photo of the holes I drilled which will indicate their position - they are not right in the middle of the depression in the B pillar metal so beware.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.