Jump to content

New and in need of help!


Maddiebooxo
 Share

Recommended Posts

I have a 1.0 standard Lupo, bought it yesterday and it's a lovely car. Only thing that's wrong with it is the heater only blows (hot or cold) on full blast (number 4) under as to why, and need it fixed sooner rather than later before the cold weather hits! Been told it's a heater resistor? But just wanted to ask some advice!

Link to comment
Share on other sites

easy fix, I had the same problem when I bought my lupo but would work on number 2 aswell. you can get a resistor on ebay for a tenner and takes less than 5 minutes to fit. In the passenger side foot well under the dashboard you will see a foam cover which needs to be taken off, a couple of torx screws holding this on I think. then if you look up under the dashboard you will see the part to change out which is held on by 2 screws iirc just undo these unplug the old one and put the new one in. put the foam back on then its job done!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.