Jump to content

Compomotive Turbo motorsport split rims! (3-piece splits)


sellick
 Share

Recommended Posts

I acquired these wheels over the space of a few years, intending to build the ultimate set for my two mk1 Golf project cars. Unfortunately the Golf's are long gone, and I'm clearing out my wheel collection to put the money towards going travelling/funding a new car. Therefore, I am offering 6 complete sets of Compomotive Turbo split rims.

These are my all time favourite wheels and you could certainly say I'm obsessed!

There are a range of PCD's, but I believe there are two sets 4x100, two 4x95.25, one 4x101, and one 4x98. There are a few spare centres also. The dishes and barrels are all in pairs or sets of four, and again, there is a good range of sizes so you can build the perfect set for your car and sell the rest on if you wish. These are all in very good condition with minimal curbing (apart from the obviously damaged ones; there are spares to replace these), but do require polishing. I know this is an awful advert with awful pictures, but I will update it is soon as I can. Here are some terrible pictures to give you an idea:

IMG_4481_zpsddfb2cb4.jpg

IMG_3036_zps2b6e6663.jpg

IMG_3025_zps950c80fa.jpg

IMG_3022_zpsfd99d1e2.jpg

photo_zps1f4e5c4c.jpg

photo_zpsd334241c.jpg

photo_zpsf36e87d2.jpg

I have refurbished one set, and had the dishes back from the polisher:

IMG_5032_zpsddfc0e87.jpg

Here's some inspiration for you!:

1_zps7659c1db.jpg

2_zps42669421.jpg

These wheels rarely come up for sale, and I've spent an absolute fortune on them (even to the point of buying complete cars to get hold of the wheels!). I've come to the point where I just really want to get rid of them, and the easiest and most convenient way is just to sell them as one lot. I have previously had interest from people building track cars because the spares are ideal for them so I may have to go down that route, but thought it was worth putting them up here just in case. I am looking for £4200 for the lot. If people are interested I will split but they will be £900+ a set as they are. I'd be looking for £1050 a set fully refurbished (I don't really have the time to do this currently, but please enquire if interested). Although the PCD's aren't all perfect for VAG applications, these wheels are extremely sought after for classic mini's, Fords and other marques.

I have full access to a machine shop (currently studying a Masters degree in Mechanical Engineering), and will be machining two sets to either 4x100 or 4x108. If you have any other requests for machining, let me know and I'll do my best, but I'm limited on free time!


The wheels are located in Winchester, Hampshire. This is my fathers house, but I am just outside Bath if that's easier for collection.


My contact number is: 07837 892836



Any questions, feel free to ask!

Link to comment
Share on other sites

  • 3 months later...

I will be in Winchester with the wheels this weekend (a rare opportunity!) if anyone wants any measurements, photos, viewings, or a set wrapped up and delivered to your door! Feel free to PM me any questions. Cheers, Jamie

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.