Jump to content

Shane56

Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by Shane56

  1. Managed it in the end after a bit of a struggle getting the sensor in, but all done now and the light has gone out after resetting the UCU, let see if its any better on petrol.
  2. When I looked there are still threads in the exhaust as I had to pull some of the threads that was left when I managed to get the sensor out, fingers crossed I have ordered a different one, so will see if that fits.
  3. I have an 02 VW Lupo and bank 2 for the Lambda Sensor keeps popping up on the OBD, so I took the old one out and when I came to put the new one in it wouldn't screw in as it seems it slightly larger thread and they don't look the same. Any advice on where I can get one of these or and item number. Thanks
  4. Cheers MK2 I have changed the air filter, I'm doing the oil and plugs as well as the oil filter tomorrow.
  5. Bought and fitted the EGR valve and the problem has gone away, but still throws up the o2 sensor, can anyone tell me if the front exhaust sensor is the same as the downstream o2 sensor??
  6. Changed the temp sensor and reset the Ecu after driving for 5 miles no light, but when I stopped the engine and restarted it the light came on again with the 2 faults. Looks like I need to clean the EGR valve to see if the cures it.
  7. MK2 going to try tomorrow so will let you know, fingers crossed.
  8. I will check that, I have noticed that the temp gauge sometimes works then it doesn't, could that be causing the problem??
  9. Will do, the power is normal , it just seems to be using a lot of petrol at the moment.
  10. Thanks are the parts readily available as eoro car parts don't sell them.
  11. Thanks for the reply, I'm pretty handy with mechanics, is this a job I can do myself??
  12. Hi all, every so often the engine management light comes on the dash, and I have taken note it's using a lot more petrol than normal. I get usually the top error on my OBD but it has not thrown another error. Anybody help??
  13. Hi all, im struggling to find the top inside door panel for the drivers door in grey, for my 52 Lupo, I have the door panel but cant get the plastic bits that hold the clips to stick to the door panel , i have tried arildite and other glues, but nothing seems to hold them onto the panel, any help would be much appreciated.
  14. MK2 thanks for the reply, if you look at the attached image where i have highlighted it, you will see it missing, this happened when i was undoing the nut to release the glass as i has to break the window as the dog was trapped inside.
  15. Hi all, thanks for accepting me to this forum. I have a vw lupo 02 model, basic nothing fancy. I have a problem with the drivers window mechanism, as you can see from the pics one of the regulators have broken. Do i need a new winder mechanism, or can i just buy the part that has broken, a link to the right part would be very gratefu Thanks for your time. Shane
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.