Jump to content

Red Devil

Members
  • Posts

    13
  • Joined

  • Last visited

Posts posted by Red Devil

  1. Hi. 
    looking for ideas regarding passengers window problem. 
    the window works perfect from drivers side switch up and down. 
    from the passenger side switch, it will only go down !! 
    IT IS NOT THE SWITCH !

    has been like it for a while and would just like to clear it up  

    it does exactly the same when applying a wire across the wiring loom terminals. 

    Could it be the motor?

     

    Does anyone  have a wiring diagram for the window switches/ motor termination plug

    thanks in advance. 

  2. Hi. 
    looking for ideas regarding passengers window problem. 
    the window works perfect from drivers side switch up and down. 
    from the passenger side switch, it will only go down !! 
    IT IS NOT THE SWITCH !

    has been like it for a while and would just like to clear it up  

    it does exactly the same when applying a wire across the wiring loom terminals. 

    Could it be the motor?

     

    Does anyone  have a wiring diagram for the window switches/ motor termination plug

    thanks in advance. 

  3. Hi. 
    looking for ideas regarding passengers window problem. 
    the window works perfect from drivers side switch up and down. 
    from the passenger side switch, it will only go down !! 
    IT IS NOT THE SWITCH !

    has been like it for a while and would just like to clear it up  

    it does exactly the same when applying a wire across the wiring loom terminals. 

    Could it be the motor?

     

    Does anyone  have a wiring diagram for the window switches/ motor termination plug

    thanks in advance. 

  4. Update………

    Replacement CCM purchased 1/3 from eBay for £30 delivered, arrived earlier in the week. 

    Fitted yesterday by my son, all  lock motors work perfectly from key and internal lock button. 

    Tonight, re-learnt key to car for remote and now works perfectly  

    only been like it for 2 years. 

    What a relief, surprising how you get used to remote locking and alarm. 

    Thanks to all responses 👍🏼

  5. The central locking DOES NOT  work whether via key fob remote or via manual lock/ barrel.  

    All doors and have have to locked/ unlocked  manually. 

    From inside the car, the armrest lock button does nothing, also if you push the door lock button down it only locks its own door individually 

    The ALARM, can be disarmed via key fob once manual unlock of drivers door has taken place. 

    hope this may make more sense. 

  6. Hi everyone, new here, and, to pick  your brains as I’m stumped.

    Lupo GTI - central locking not working,  remotely or manually via lock barrel. 

    As  above, works from neither door or either remote. 

    VCDS has confirmed key is talking to car, but no operation, no other fault codes present.

    Drivers door lock module has been swapped for new, made no difference!  

    When door is locked manually, alarm arms a gives a short SQUEAK from alarm sounder, and indicators flash. 

    Can be unlocked manually, and disarmed via unlock button on key, and car can be used normally.

    Metered out all wires for continuity  between the drivers door and the connectors in the footwell and all okay. Even physically checked the wires in the rubber boot in the hinge and all okay.

     

    ANY HELP WITH ANSWERS APPRECIATED. 

    Lots of posts on here regarding central locking seem to end without answers. 

    Thanks, Colin 

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.