Jump to content

henry.0112

Members
  • Posts

    119
  • Joined

  • Last visited

Everything posted by henry.0112

  1. Ok cheers. I’ll let you know how I get on
  2. So basically try and remove all the camber and see what’s its like at that point?
  3. Cheers for the help mate. Only problem I have is that I don’t really see why I have to mess with the ball joints when all I’ve done in the first place is taken the strut out and not touched anything else? Cheers
  4. Hi all. After removing my front struts to inspect the condition of the top hats and such like, i refitted them and to save time aligning I put them in at the maximum amount of camber. Only problem is the passenger side has a tonne of toe in after doing this. Can anyone help and tell me what I need to do to get it back to how it was? Cheers
  5. Does anyone have a foglight front bumper for sale near york? Even the lower half would do if you have one. Thanks
  6. After having no luck with an auxilary adaptor i bought off amazon for my beta head unit, ive been on the lookout for other solutions, and if they work properly i think a bluetooth adaptor would suit my needs. Has anyone had any experience with these? Do they work? Is the audio quality good? Thanks in advance for your replies
  7. Tried it in the back of the radio and still says “no cd”, i checked and it has a ground wire. All the wires go to the correct pins on the plug as well.
  8. I recently bought one of those aux cables that plugs into either the back of the beta radio or the cd changer port on the back of the cd player. However when plugged in to the radio it just shows "no cd" and if you plug it into the cd player and press select to move the function to "cd changer" it just goes straight back to playing the cd. Is there anyone that could help or that has had the same problem and managed to sort it? Cheers, Henry
  9. Sorry to revive an old topic but i’ve just bought one and have the same issue. Did you manage to sort it?
  10. Theres a pin that goes through the plastic and through the handle, if I remember rightly you can tap it out with a hammer but if not i dont remember it being that difficult to figure out
  11. There are 2 tube shape retainer clips that sandwich the door card between the handle and the retainer, then to seperate the door handle itself from the doorcards there are a few metal clips around the inside of it with glue around and behind them. Cut as much glue as possible out and use some pliers to pull the metal clips out. The handle should just pull out. Then when refitting just use some silicone where the glue was??
  12. Yeah took it out today and looked fine so fingers crossed it will stay that way
  13. Hi, ive just tightened the nut at the end of the clutch cable and all appears to be well, but im going to take the whole cable out as i fear that it might have stretched and caused this problem in the first place.
  14. When i get chance i'll have a look and let you know how i get on, cheers ror the help
  15. Not sure why over night it would have stretched that much but worth a try, i'll give it a shot this week and let you knkw what happens
  16. Yes but only in the last half inch and its like an on off switch
  17. I noticed the other day that the clutch pedal in my lupo has no resistance until the last half inch or so, this cant be caused by wear because the car hasnt been properly driven for the past 6 months, has only been moved in and out of the garage and has always been fine. Does anyone have any ideas of why its doing this? Cheers
  18. I had thought about that, but what has made it get this bad in the first place?
  19. Ive been noticing over the past few months as ive been messing around with my 1.0 that all the pcv tubing is full of oil and the air box, throttle body, and intake manifold are caked in oil and all sorts of crap. So i started to dismantle the intake side of the engine and the crank case oil seperator is caked in oil and what im guessing are carbon deposits, and the inside of the engine around the oil trap is too. Is there any way of stopping all this oil and crap from going back into my intake? Or if its a part that's failed? Help would be hugely appreciated because im really stuck, thanks
  20. Hi I was wondering if anyone had a twin exit sportex rear muffler for sale for a 1.0 litre lupo, thanks
  21. I think its pin 13 if that rings a bell?
  22. Hi. Could anyone tell me which pin on the back of the headlight switch controls the sidelights? Tried with multimeter but not much luck. Also is the sidelight fuse the same fuse as something else as I can't find it. Cheers
  23. Ok cheers mate from what i can remember i think its around 10mm
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.