[Radio wiring]

As you can see alot has been cut in the past not sure what them wires are coming from the left or right sides are, I'm just wanting to put a standard radio back in and ideally have all speakers and tweeters working any help guys thank you 

 

[Radio wiring]

I just need some help with all the wires behind it seems previous owners have cut and mixed up wires I just need to know what color are the door speakers and what color are the tweeters so I can find the best way to run my own wiring and fix a silly persons bodge job, and if the power wires are correct because I've had a radio in before and it killed my battery overnight. 

 

Any help would be much appreciated thank you ☺️

[Anti roll bar]

I'm looking for an original anti roll bar if anyone has help on finding one or part number would be much appreciated. I've never had one on my lupo since I've owned it but I'm guessing this is because one of the last owners removed it due to coilovers being fitted or having it slammed in a past life. Can I still have one fitted with coilovers? If not to low that it not sure on this topic at all.

[Brass tapered rings gearbox]

My spare box on a home made stand. 

[Brass tapered rings gearbox]

44 minutes ago, mk2 said:

Yeah, happened to one of mine. It provides the limited slip diff feel, but in reality does nothing that I can see. May reduce diff noise a bit? I actually just put my pieces back in- held by assembly grease. Once in place, they can't fall out as the spring keeps them there. Where did you get the replacements? And how much $?

Did you just change the bearings in your gearbox? Pics? 👍🏻

Anyone else have any clues why they are there and what they're for? 🤷🏻‍♀️

I had a spare ETD box that needs a refurbish so I took them out of that I was changing the seals all round on the box as they were all leaking like a wet nun 🙏

[Brass tapered rings gearbox]

Has anyone had these break on both sides of the drive shaft cups? Lucky I had spares 

[Torque specs gearbox help]

Can anyone provide me with the torque specs for this driveshaft cup as I'm removing all the seals to replace them.

the gearbox is ETD code.

Thanks 

[Red seat arosa in newtyle Scotland]

Don't have much to go on other than it's was a nice tidy red arosa that made my day nice to see 😃

[Gearbox cover]

Thanks guys you two are the best 😊

[Anyone know how to remove a broken plastic tab I made to remove the stereo?]

Get some pic tools and try lever the tab out 

 

[Gearbox cover]

I'm looking for the small cover on the gearbox does anyone know the part number or a place to find one would be great help. 

[Standard ride hight]

Hi guys would anyone know what the standard ride hight is on a 1.4 16v? 

Thanks 😊

[Help finding a part]

Anyone know where I can find this part please 

[VALVE STEM SEAL]

Hey guys does anyone know where I can get some valve stem seals from as I'm rebuild an engine from ground up thank in advance 😊

[Lupo not starting on key]

So the key will not start the car but if I jump from battery to the solenoid wire it will start I'm debating whether to just run a new wire from the ignition switch see if that works any other ideas or help will be grateful .

[Brake squeaking]

Humm not sure I check them regularly and no movement at all unless it's not gone completely yet I'll have a look thanks

 

[Brake squeaking]

Hi guys me again lol 

Ive got a constant squeak coming from the left brake disc I've changed everything disc caliper sliders pads everything I've even removed the copper grease and cleaned everything up and it still comes back within 5 minutes of driving and getting the brakes hot the squeak goes away when I apply the brakes and comes back the second I lift my foot off the pedal I'm at a complete lose of what to try next any help guys thank you

[Crankshaft oil seal]

Legend @mk2 your the best always has the best advice I'll look into doing this asap rocky 😉

[Crankshaft oil seal]

Hey everyone I am in the need of information about changing the crankshaft oil seal as I'm leaking from behind the flywheel is it an easy fix or a ballache? Can the seal just pull out and replace without removing the whole unit or isn't that possible any help is much appreciated 😃

[Car judder or vibration]

It's weird how I've only touched that one thing and the whole car is vibrating more than a dildo lol

[Car judder or vibration]

Humm I'm sure mine is ok since they have been changed recently and the mount Is the only thing I've touched that can cause this can only try to fit the old one and see if it is because of a new part has been fitted 

 

[Car judder or vibration]

So I just changed the rear gearbox mount that bolts to the subframe and now the whole car is vibrating when accelerating or rolling along any help with this would be much appreciated guys thank you.

[Armrest]

If its a universal one then it can be attached to the central console that runs inbetween the seats just have to screw it to the plastic bit i dont think anything else would fit without huge modification to the car link or post a photo could help more 

[Flywheel torque spec]

23 hours ago, lupo 1.7sdi said:

60 Nm + 1/4 turn (90 °) further

Must be renew.

 

Thank you mate ive got new on the way 

[Flywheel torque spec]

Hi guys

Im in the need of torque specs for the six stretch bolts in the center of the flywheel i can't find them online any help would be appreciated 

 

Thank you