Foogzy

That's what I thought

Will let u know how I get on , did I need to sand them aswell before primer , or would you all say just clean it n spray ?

Because heat normally drys quicker and I had them out for a full day drying in the shed and they never dryed , plus am one of the most impatient ppl out their , so ave only messed up 1 , which I'll need to sand down n restart , just let them completely dry on the first side before flipping and doing the other side then , even if it takes a week to dry lol ? And do thinner coats

Nvm , misread m8

Anybody know how to dye the headlining black and do the grab handles black , as I've tried to do the grab handles and completely failed I sanded them down with 800 grit , 2coats of primer , 2 coats of paint . 1 coat of clear Flat down , with 50degrees in an oven , 20 mins roughly between each coat , the 1st side was fine , but when I flipped it over for the rear , the 1st side was gubbed , so an somebody please do a walk through or some type of guide as I ain't found 1 yet and need help lol

Just do an engine conversion with a vr6 from a corrado then

New item on the list possibly

If u upgrade the cams would u not have to bore out the engine ? U could probs skim it upto a 1.4 displacement . Sayin that though the metal would be weaker and not very reliable , (heat, wear etc) ? ?

Hmmmmmm , any difference in design ?

So what about air boxes , any a straight swap from other models ?

Could be that one , and no but I will over the next few days

Nah but seriously , a 1litre is an economy car dude , just debadge it , lower it on some springs , and a universal backbox, a set of wind deflectors sum stickers , and old school steel wheels , don't blow the bank , and if you follow what I say you will get a nice wee runabout just service it regularly and keep it clean as far as the performance goes .

Nah but seriously , a 1litre is an economy car dude , just debadge it , lower it on some springs , and a universal backbox, a set of wind deflectors sum stickers , and old school steel wheels , don't blow the bank , and if you follow what I say you will get a nice wee runabout

My mate is doing up his caddy , and he had a toureg grill lying about so I grabbed it to see how it would look on the lupo , it fits on perfect , would just need to cut a few bits here n their to make it fit , anybody else done this before ?

Turbo

Disney

Darren from Glasgow, looking to go to some meets next year , maybe get a good camera n make some YouTube vids

Anybody know where to get fabric paint? as I am looking at tidying up the interior want to do the headlining black , spraying the handles as I write

Had 2 vauxhalls, then got a vw , never been happier ! Enjoy

Sucks lol , u could try tucking the l plate underneath the reg plate sticking out cheakily , like the p platers over in Aussie

Theirs always a driveway rattle can job lol

Theirs always takin it to a garage and gettin them to heat the bolt off for a fiver or summin

How much is it normally for a respray on a car ? Obviously the wrap would be cheaper

A flattened can of coke ? Lol

What wing mirrors are a straight swap from other vw models for the lupo ??