Hinglezz

Brake pads! Erchier pads front and rear brand new! 07763096114 for details!

Based Brierley Hill - West Midlands DY5

Stunning Lupo GTI Low Mileage! Hello, this advert is for the regrettable sale of my Lupo Gti, it's done just below 64000 miles, the car is a great running and very reliable, starts everytime. No knocks or bangs. I have full service history as well as records of all jobs carried out. There is a big specification of subtle extras that have been added to the car. Recent: Cam Belt and tensioners Cambelt done - 56738Next belt due - 120214 Full service (air, oil, fuel, gearbox oil, plugs Brakes checked and greased Handbrake adjusted New tyres x4 (1000 miles old) New number plates as had to remove my private registration and lost old plates. Interior extras - Audi TT knee bars Audi TT stainless footrest 4x FLI speakers JVC double din stereo with wiring into boot ready for sub, Bluetooth connectivity, USB into ashtray and movie compatible, either by usb or disk. Colour coded interior trim Exterior extras - PowerflowMid-box and scorpion centre exit stainless back-box. Not silly loud, however sounds good.Xenon bulbs and white light bulbs all round. Painted engine cover60mm lowered on springs so ride is still comfy and not hard as Coilovers. The car can still easily manage speed bumps.No mechanical engine modifications.Lupo taillight a have been tinted to replicate cambridge rear lights (looks identical) resprayed to white (bodyworkOn car is very good no obvious marks) MOT till - 16/03/15Tax till - 01/08/15 Please note. The car was a CAT D due to damage to the nearside (passenger) wing and door only. The garage fitted a genuine Gti wing and door (before respraying White). Selling only because I brought aBigger car which was necessary for work, I spend £1000s on this cara as it is a great fun little run about. I'd keep it however don't have space . Any questions please feel free to ask.ThanksJames07763 096114 £3500 OVNOhttp://s1154.photobucket.com/user/hinglezz/media/FullSizeRender.jpg.html?sort=3&o=0 http://s1154.photobucket.com/user/hinglezz/media/IMG_6791.jpg.html?sort=3&o=1 http://s1154.photobucket.com/user/hinglezz/media/IMG_6792.jpg.html?sort=3&o=2

Hello I have some standard lupo 14" alloys and want to strech some space savers on them (may be a bit ridiculous) I am just wondering if this is possible, theyre only the 5 spoke wheels (RESPRAYED, not the ones in photo) and the wheels are 5.5cm Wide from inner lip to inner lip. Could I stretch some space savers on these? And if anyone has any photos of these stretched it'd be much appreciated Thanks James

What wheels are they? I like em!!

Thanks for the help

Thanks, really appreciate the help, now I know what i have to do Ill get on with it Thanks

About the polo i've brought... I had a look today and found this is going to be a right A*** of a job! I have a 1.4 remember so every loom on the car is different, all plugs are different... The engine connections isn't a big problem since the loom is made for a 1.6 gti... BUT The interior looms like speedo cluster, hazards, fuse box, all of this sort of stuff is going to be nearlly impossible to swap over!! And to make it worse I counted the ecu plugs on the lupo and there is a different number of pins! so they won't fit onto the 1.6 ecu anyway so I may have to use polo ecu plug... I think its going to be a dashboard out joband wires cutting and chopping honestly I can't see any other way around it! Any help at all would be good, has anyone done it before and can tell me the best way to do it as I'm trying to avoid the nightmare job if there is an easier way... Help is appreciated Thanks

Yes it was, I cannot tell weather it was within the key or within the ECU, but By bypassing the ecu immobiliser I cured the effect.

Just taken ecu down to someone in Stoke on Trent, to a company known as Vagtronics and he has removed the immobiliser form the 1.0 ecu, I found him really helpful since he did it at 9:00pm whilst i waited and I can garentee no other company will do it there and then whilst you wait! If anyone else is interested here's the phone number: 07973 412446 I will be definatley using this guy again for my next ecu and electronic problems, he is 100% recommended out of my book. The car is now running perfect and a good job has been done, will definatley be using this company again. Thanks

I have read the codes from the input port in the ash tray, where and how else can u get immoboliser codes read?

Hello I had a lupo 1.0 that ran absolutly perfect. I drove it to work one day and it was fine and then the airbag light turned on... I stopped and started it twice on the way to work in attempt to remove the light (and it didn't work) but ran fine. Then 10 minutes after getting to work I was asked to move my car, It would start up for a couple of seconds then stop running. I have tried coils, leads, plugs (All basic stuff). And code read to be coolant temp sensor, I changed it since I have a 1.4 with same coolant temp and still no luck... After clearing codes it ran fine for 10 mins then cut out again and has gone back to the inital problem of only running for a couple of seconds. After that I tested the spark and found (specail tool) that it'd spark for a couple of seonds on start up (making it run) then cut off the spark all together... Just wondering if anyone else has had problem and what other factors it may be, the car was running fine (no problems) at all until i came back to start it... The only thing thats changed is airbag light. This is a real pain and would really appreciate any help possible. Thanks James

No worries look forward to seeing you soon then

Well a mk1 golf (nearlly finished) and white lupo, if ur lupo is on the deck you may not be able to get up drive so may have to park at bottom and walk since it takes me about 30 mins and a hell of a lot of hole filling to get my lupo up haha, it's only about a 10 sec walk

The car is at a different location to steering rack :/ but your welcome to see the projects that are complete