Jump to content

ministig

Members
  • Posts

    553
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by ministig

  1. 165/50 on the 15x7 195/40 on the 7.5x16
  2. Both take patience. I have done mine with the rubber mallet method and you can't tell they have been done from the lines of the arches.
  3. Rubber mallet and heat gun Patience
  4. If you are getting rid of the 1.5" dishes, I will happily take them off your hands! Oh and I am pretty sure OZ dishes will fit these wheels, I have some spare dishes and stuff if you wanted to test different options!
  5. Don't say stretched tyres to the garage though, some get funny. Go in and ask to put some tyres on wheels - simple as that
  6. Even revolution in Newcastle do camber adjustment! Any decent 4 wheel laser alignment place will do it, you can certainly even them up. Or ask for a set amount of camber. I had 1.5' set up on my lupo, the smallest that they could get.
  7. I put mudflaps on my sport - the rear screen still got scruffy instantly
  8. Not really as the rolling radius of a 195/40/16 is pretty much the same as a 195/45/15
  9. If you have spacers up front take them off and cut down your bolts/get new ones as long as you have the caliper clearance! The only other option is gettin your arches pulled a bit more on the front - but sometimes they look a bit a daft. 185/45 will give a canny bit more clearance as they will be more stretched as well.
  10. Didn't littlegreengiant run a square plate on his loop? As koop says, pointless without fitting the recess around the plate. I went for an oversize plate on my lupo to fill the recess, made the car look even smaller!
  11. ministig

    Ats Classics

    OZ turbos are awesome!! I wasn't referring to your car on banded steels btw, I guess you haven't seen the red lupo that is on13x10 banded steels sitting like a tractor.... Edit: here's what I'm talkin about http://forums.clublupo.co.uk/index.php?showtopic=71731
  12. Are the up wheels fully polished? An up! Passed me today and they were polished. Looks insane tbh, amount if detail is amazing
  13. ministig

    Ats Classics

    I suppose so, but too wide or too low offset would still look gash.....awaits red lupo on banded steels pic
  14. You won't be able to get hubcentric in 10mm as they wouldn't be able to have the centric part. If you upped them to say 15mm you might just be able to get them hubcentric Edit, unless you could get some custom 10mm ones that would centre on the wheel (without the spigot) and still be centring on the hub at the same time
  15. ministig

    Ats Classics

    That is a useless statement though, it all depends on offset.
  16. Me either, Here's an old thread on the matter: http://forums.clublupo.co.uk/index.php?showtopic=34803
  17. werent they 14's or 15's though, 16" would have more arch clearance issues
  18. Willtheyfit.com has all the answers you need for the poke The 9" will poke quite a way, you would be best sticking to 8" et20 ish for the rear if possible as the stretch/poke is manageable, at a push 8.5"
  19. The 9" on the rear would be too wide 165/45 on an 8 is crazy stretch too, but should fit with some arche rolling on the front. 185/45 would be better imo
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.