Leaderboard

Just replaced mine with cheap ebay replacement at £6.99 for both window switches, use a small plastic pry bar to pop out switches then i used a small flat head to dislodge old switches from casing. About 10min job

They were recommended by 3 different people on pistonheads. Yes - the powder coating looks great, I was actually admiring it while on my side taking a break from being a fanny - but with less than a 100 miles on the road I would expect that to be the case! How decent does the metal need to be -if the panels is meant to be 1.2mm and the panel on the car has thinned out - how thin can go down to, hoping to get away with 1.0 in some areas and not have to cut back a lot more metal. With nearly the entire sill opened up I can treat the internal metal with something like kurust and then add some weld through primer. Getting the existing wax off is not going to be fun