666DUB Posted June 17, 2017 Report Share Posted June 17, 2017 Like that diffuser, a lot Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted July 26, 2017 Author Report Share Posted July 26, 2017 Roof is now off to get a carbon mould made  and front end of cage is getting redone again through the dash. Dash will also be getting flocked! No interior going back in so whole floor will get prepped b painted! Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted July 26, 2017 Author Report Share Posted July 26, 2017 Diffuser and shifter plate got some black on them today! Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted August 22, 2017 Author Report Share Posted August 22, 2017 Got the cage finished off, then proceeded with removing standard runners and opting for fia approved weld in rails! And sold my 2 corbeau club sports and bought a new sparco grid 2 seat  have also put down a deposit on a o2j box with a quaife LSD- only covered 800 miles and new bearings! Boost! Quote Link to comment Share on other sites More sharing options...
Lewiss_Lupo Posted September 2, 2017 Report Share Posted September 2, 2017 Can wait to see more progress of this! Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted October 4, 2017 Author Report Share Posted October 4, 2017 Now onto cage prep! Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted October 10, 2017 Author Report Share Posted October 10, 2017 Cage now in primer! Quote Link to comment Share on other sites More sharing options...
Rich Posted October 10, 2017 Report Share Posted October 10, 2017 the lsd is the best thing you have done for this. Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted October 11, 2017 Author Report Share Posted October 11, 2017 8 hours ago, Rich said: the lsd is the best thing you have done for this. Yeh that fell through as my pal decided against going 4wd with his mk2 Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted October 13, 2017 Author Report Share Posted October 13, 2017 Ah, a big sigh of relief now that the inside is done and dusted paintwise! Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted October 24, 2017 Author Report Share Posted October 24, 2017 Front end back on! Quote Link to comment Share on other sites More sharing options...
Rich Posted October 24, 2017 Report Share Posted October 24, 2017 you should so be painting things like the inside and the tailgate (before fitting) instead of fitting things which will just have to come off again or be pointless masked up. If you think about an order to do things in then it will be quicker/cheaper. just some thoughts..... Quote Link to comment Share on other sites More sharing options...
Ryan_lupoo Posted October 24, 2017 Report Share Posted October 24, 2017 On 01/05/2017 at 9:58 PM, GregGLupo said: got the shafts back last Friday, hurt the pocket a bit but at least there done! Beefed up aswell so they should last! They got a quick sand blast on Saturday morning then fired into work and coated them up along with with the cv joints he also blasted! Fingers crossed the car should be going away this weekend for all the welding/fabrication work! Got a question which could really help me put if you choose to awnser  What size did you get the n/s shaft shortened to, i have a 20vt aswell my shaft is wrong and i need to re do it, but wanting a base length to go off of, as i think mine at the moment is too short, really liking the yellow aswell btw thats the same route im going down but my cars black  Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted October 25, 2017 Author Report Share Posted October 25, 2017 On 24/10/2017 at 4:37 PM, Rich said: you should so be painting things like the inside and the tailgate (before fitting) instead of fitting things which will just have to come off again or be pointless masked up. If you think about an order to do things in then it will be quicker/cheaper. just some thoughts..... I paint cars for a living so will always be cheap for me It will all be coming to my work to get painted once it’s driveable, tailgate isn’t bolted up properly. Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted October 25, 2017 Author Report Share Posted October 25, 2017 21 hours ago, Ryan_lupoo said: Got a question which could really help me put if you choose to awnser  What size did you get the n/s shaft shortened to, i have a 20vt aswell my shaft is wrong and i need to re do it, but wanting a base length to go off of, as i think mine at the moment is too short, really liking the yellow aswell btw thats the same route im going down but my cars black  Now you’re asking, iirc I took 65mm off overall length but then I ended up lengthening the o/s shsft too by about 30mm Quote Link to comment Share on other sites More sharing options...
Ryan_lupoo Posted October 25, 2017 Report Share Posted October 25, 2017 Just now, GregGLupo said: Now you’re asking, iirc I took 65mm off overall length but then I ended up lengthening the o/s shsft too by about 30mm thanks for the help, which shafts are you using? Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted October 25, 2017 Author Report Share Posted October 25, 2017 2 minutes ago, Ryan_lupoo said: thanks for the help, which shafts are you using? Lupo gti ones Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted January 25, 2018 Author Report Share Posted January 25, 2018 Dash flocked and back in, off to my work for paint now, then off to my pals garage to get the conversion finished off! Quote Link to comment Share on other sites More sharing options...
Rich Posted January 25, 2018 Report Share Posted January 25, 2018 super t! nice  1 Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted January 28, 2018 Author Report Share Posted January 28, 2018 Couple more photos Red lupo is the gf’s! Only 40k on the clock Quote Link to comment Share on other sites More sharing options...
Rich Posted January 28, 2018 Report Share Posted January 28, 2018 wtf is that spoiler? 1 Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted January 28, 2018 Author Report Share Posted January 28, 2018 25 minutes ago, Rich said: wtf is that spoiler? Exactly that , a spoiler. Quote Link to comment Share on other sites More sharing options...
GregGLupo Posted March 9, 2018 Author Report Share Posted March 9, 2018 Just need a turbo pipe made up then off for mapping. Deadline is for dubshed beginning of April so fingers crossed! Quote Link to comment Share on other sites More sharing options...
Rich Posted March 9, 2018 Report Share Posted March 9, 2018 ffs, hurry up already! Quote Link to comment Share on other sites More sharing options...
mk2 Posted March 9, 2018 Report Share Posted March 9, 2018 you wanna sell any of those mk2s in the background...? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.