hippytyre Posted February 6, 2013 Report Share Posted February 6, 2013 Hello,I was fitting discs and pads to my girlfriends 1999 Lupo SDI and one of the caliper/slider bolts broke off into the hub. I've drilled it out but I'd still rather just replace the hub as I think I opened it up too far.My problem is what is this part called? A hub carrier? A hub? I've been on ebay looking but none of them look right. I'm talking about the large part that bolts onto the strut and the caliper bolts onto it. Does anyone have one or can they point me in the right direction?Thanks. Quote Link to comment Share on other sites More sharing options...
Hazy Posted February 6, 2013 Report Share Posted February 6, 2013 It's a hub, it's the same as the one found on the 1L and the 1.4 -basically anything that's not a sport, as the faster models have carriers. Anything that houses the 239mm diameter discs. Quote Link to comment Share on other sites More sharing options...
jadelauren Posted February 12, 2013 Report Share Posted February 12, 2013 It's a hub, it's the same as the one found on the 1L and the 1.4 -basically anything that's not a sport, as the faster models have carriers. Anything that houses the 239mm diameter discs.Exactl as Hazy said. My wheel bolt sheered off into the hub. You will just need a new hub and no bearing unless your a dab hand at eli coiling it back I got my hub off ebay, seams to be good for all bits and bobs like that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.