tdwindustries Posted February 25, 2005 Report Share Posted February 25, 2005 (edited) I have done mine today both bits they are in 2 bits very easy to do front cable was £3.78 back was £3.90 also put new handle mount on inside that was £1.89 this is with discount as i work in the trade.it seems it is the first half from the handle that gets kinked and goes floppy. thought i better do it before it goes for service on Saturday and before the Delars brake it. To do it take grill out but pushing in the 2 tabs at the top of grill.undo 2 10mm bolts that hold lock to front panel and the 30 torx that holds that as well. un-clip cable pull though front panel then un-clip the black plastic joiner and that's the front sectionRea section take handle of inside car unscrew phillips screw take kick trim off undo 2 screw for handle mechanism then pull cable though.putting back is reverse very easy! Edited January 20, 2010 by nfbr Cleaned by: nfbr. Link to comment Share on other sites More sharing options...
Recommended Posts