Pdoubleyou Posted February 18, 2018 Report Share Posted February 18, 2018 I have some wires I can’t identify during a conversion. I need to work out what these plugs were for so I can trace their origin. Any help is appreciated so I don’t have to pull the dash back off. I uave checked autodata and couldnt find them and also in the voltage tree documents. T1 with one blue wire t2 with two wires, blanked from factory. Blank shown in pic. Was sat next to washer bottle. t4 with two old ecu feeds removed, and two remain to internal loom. They are pin1 white/brown and pin2 yellow/red big thanks for any help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.