henry.0112 Posted August 28, 2017 Report Share Posted August 28, 2017 Ive been noticing over the past few months as ive been messing around with my 1.0 that all the pcv tubing is full of oil and the air box, throttle body, and intake manifold are caked in oil and all sorts of crap. So i started to dismantle the intake side of the engine and the crank case oil seperator is caked in oil and what im guessing are carbon deposits, and the inside of the engine around the oil trap is too. Is there any way of stopping all this oil and crap from going back into my intake? Or if its a part that's failed? Help would be hugely appreciated because im really stuck, thanks Quote Link to comment Share on other sites More sharing options...
Skezza Posted August 29, 2017 Report Share Posted August 29, 2017 Catch can. Quote Link to comment Share on other sites More sharing options...
henry.0112 Posted August 29, 2017 Author Report Share Posted August 29, 2017 I had thought about that, but what has made it get this bad in the first place? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.