sintoni
-
Posts
36 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by sintoni
-
-
TY. I'll drive the car for a couple of days with the door cards installed, just to keep track of the stiffness.
Then, I'll go on with vibration damping; at last, I'm gonna change the dashboard and wire everything.
Really happy with the result till now: neither the speakers' magnets do not interfere with anything, nor the door cards themselves. There's a close gap between them and the seats).
-
door cards installed
-
this is the "fine adjustement"
-
some fine adjustment to do, but the final result is very close to the pics
-
the left door card is back home! the job is what i was looking for.
-
hmmm, the last thing seems to be finished
-
1.4 sport, the engine is stock but i plan to do something
-
the pods are ok.
now working on right door card
-
the last job: building the right door card
-
6 hours ago, Skezza said:
Assuming you get the wrapping to take nicely, this could look stunning. It's not usually my thing having loads of speakers, but the attention to detail here really is impressive.
ty. I decided to pay some money to a real pro to have the door cards wrapped, because I'd like to have a good final result. same for the pods, I had them sprayed by a pro.
-
painted in LC9Z
-
Really happy with Kenwood KDC-5100BT: it has time correction, BT, USB, AUX, FLAC reading. Cheap enough, it has a minimal design. Take a look here:
http://www.kenwood-electronics.co.uk/car/rec/bluetooth/KDC-X5100BT/
-
Mounted everything on the standard door card: I had to use some fiberglass (over acoustic carpet) to close the gap (the door cards are not plain). BTW, the left pod is about to be carpeted in black leather by a pro. Meanwhile, the pods for midranges and tweeters (and the one for two gauges) are about to be sprayed.
-
Some grills to prevent the loudspeakers to be kicked...
-
TY mate. keep in mind it's not my job (i'm not a pro), and i'm very slow at working
(I still have to fill and paint the speaker pods and the gauge pod)
-
Ready for carpeting. Smoothened all the edges with the router.
.thumb.jpeg.eeac79df2f072d9cd24e58440a6e35ba.jpeg)
-
only nine speakers, it won't be a spl monster
-
Goin' on with router and filler
-
That's the structure for the left door card. Everything was done with a router; now it has to be finished with some epoxy filler and sandpaper.
-
At last, I decided to place two cone midranges on the dashboard (Hertz HL 70) and four 6,5" woofers (Electronic Melody MCW65N) on the doors (two per card).
The tweeters are two Ciare Planet CT 250; the subwoofer is a Coral Target TLS 12.
Tweeters and midranges need a passive crossover I'm gonna build; everything else has an electronic cut (approx 80 Hz sub - 300 Hz woofers, to be decided during the set-up).
-
Working on the door cards. They will fit two woofers each. The structure is MDF 19 mm + fiberglass.
-
nice: the pods are ready to be painted. they fit correctly on the car, close to the windscreen as thought at the beginning of the project.
-
the first pod is ready to be painted; the holes on the dashboard do match.
-
about to be finished
.jpeg.28ed689ea473602f1ba73c30fc597925.jpeg)
arosa mid (or hi) fi
in Interior and In-Car Entertainment
Posted · Edited by sintoni
many thanks mates.
today i got the only missing item (a 6-channels rca cable), thus i can go on with the car.