205xld

As per the the title does anyone have a good condition drum braked rear axle for my Lupo? Photograph of my car below.

I purchased a SDI to use back and forward to work but it has gradually won me over, Welcome to club Lupo. What colour is your 205 GTi and how long have you owned the car?

Welcome to another Ayrshire Lupo owner!

I had my Bilstein dampers fitted this morning, then washed and polished my Lupo this afternoon.

A seat must be present for the seatbelt to be testable, if there is a defect in the belt the MOT tester should advise you of this. He will most likely advise that the rear seats are removed. http://www.motinfo.gov.uk/htdocs/m4s05000201.htm

These are on ebay but are flannel grey with blue edges. http://www.ebay.co.uk/itm/NEW-GENUINE-VW-LUPO-FLANNEL-GREY-BLUE-FRONT-CARPETS-MATS-SET-/281274940251?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item417d4afb5b

Here are some of my other cars. 1986 Peugeot 205 Automatic, less than 11500 miles from new. 1995 Peugeot 205 Mardi Gras Diesel, just under 40000 miles from new. 1994 peugeot 205 Mardi Gras Turbo Diesel, around 110000 miles. 1987 Peugeot 205 XLD owned by me from new and with almost 501000 miles. 1996 Peugeot 205 Diesel, less than 11500 miles from new. 1996 Audi A4 Avant TDI 110, almost 219000 miles. 1981 Renault 14 TS, this was my Fathers car, purchased new and almost 59000 miles. 2001 Audi A4 TDI SE 130, 18500 miles. 1983 BMW 323i .

110k for my SDI

Just a short update. These arrived during the week. Surprisingly around £67 cheaper from Ebay Germany. Before springs fitted. And after.

The car was stripped to a shell, genuine BMW wings, scuttle panel, front panel and rear panel fitted. The seats were recovered with the genuine material which was available in 1991. The photos of the car undergoing the work are all pre digital era I am afraid.

Just to keep your spirits up, here are some pics of my 323i. I have been where you are now and restoring a car is lots and lots of hard work! Totally factory standard not even a stripe.

Just checked the British brochure for a 2003 Lupo and the CD player was above the radio.

CRS tailgate spoiler fitted and painted, before anyone asks it does hit the arial causing the it to bend Fitted chrome interior door handles, purchased from the dealer and GTI seats. I have the cover for the drivers seat. After some polishing. And finally with some polished stainless steel trim around vents, heater controls and door mirror adjusters.

Usual condition gearstick and gaiter. An interior shot after much scrubbing. Finally managed to source a set of mud flaps, used though. Secondhand lower fog lamp valence found. Fitted R line badge to front grill and tailgate where the SDI badge was. I added a stripe to the side with a Gt decal, this is from a Peugeot 205. Found this secondhand on ebay, photo below is as delivered. After some polishing and painting with high temperature paint. Back box fitted. Drums springs etc painted in preparation of fitting alloy wheels.

Below are photos taken of the car when purchased in August. The car is being used for a commute of 114 miles a day to work. A close up shot of the OSF wing showing corrosion around the arch. The following weekend in for wing replacement and repair to drivers door. Quite surprising how crusty the wing was when seen off the car, actually quite surprised to find corrosion like this but the purchase price did reflect this. On inspection this was found on the inner side of the wing, obviously accident damage from early in its life. The bodyshop that did the repair had not even painted the inner side.

As per title spotted this yesterday afternoon between Patna and Dalmellington, almost certain its the same Lupo I spotted several weeks ago turning off the A75 into the Chocolate Factory. Is it anyone on here?

Till PC Plod wants them removed due to not having headlamp wash fitted. Yes the car will pass an MOT without them but police use construction and use regs.

A photo taken of my 205 Automatic a few months ago. An underside photo from the day of the MOT. The mileage at the beginning of summer.

I have a 2001 Audi a4 tdi SE 130 with 18500 miles and a 1986 Peugeot 205 Automatic with 11600 miles from new.

Does anyone on here have one of these fitted to their Lupo, if so could you please post a photo? Again can I have opinions on them to. http://www.superspeed-racelook.com/AerodynamicBody-Styling/VW-Tuning/Lupo/JMS-rear-apron-Racelook-for-middle-exhaust-VW-Lupo::125902.html Thanks Kenneth

I have been looking for a rear spoiler for my Lupo and found this. http://de.csr-shop.info/public/catalog_xmlxslproducts.aspx?art=viewproduct&suid=315&productid=49952952 Has anyone on here used one of these and can I ask what your thoughts are? Thanks Kenneth

Hi, I have been a member of other forums for several years but purchased a black 2003 Lupo on Friday so thought of joining this one. No great plans for this in the meantime but knowing me it will have something done in the near future. None of my 205's are as they left the factory but all mechanically standard and not lowered, hence the Lupo will follow like these. I don't have any photos of the car at the moment. Anyone here suffered from the VAG rusty front arch on their car? The drivers wing on this car has the problem but the car was priced accordingly This will be dealt with as a matter of priority.

A bit off topic but my 205 XLD which I have owned from new has clocked over 500000 miles. I have just purchased a 2003 Lupo SDI.