Jump to content

666DUB

Premium Member
  • Posts

    168
  • Joined

  • Last visited

  • Days Won

    21

Everything posted by 666DUB

  1. Excellent! they are going to look really good, five spokes always look good, either parked up or on the move, and so easy to clean.
  2. Two very nice Lupo`s, especially the Blue one.
  3. Got my key rings. There great just the right size. Thanks, Tony.
  4. Have you tried WD40 with a micro-fibre cloth, as opposed to a smooth cloth, with the micro being rough its better. Spray plenty of WD on the cloth and rub like hell, a little bit at a time, its time consuming but its always worked for me.
  5. 666DUB

    Stubby ariel

    Fraid so, but its not to bad.
  6. 666DUB

    Stubby ariel

    I would like to post a photo of the aerial, and of my Lupo as well, I've tried but am a bit fik with computers. But take it from me it looks great, and a bit different from the norm.
  7. 666DUB

    Stubby ariel

    I have a new shape Kia Picanto aerial on mine, perfect fit, perfect reception, looks great due to the screw effect. £13.00 inc vat from Kia dealers.
  8. I recently curbed 2 of my alloys, no chunks out, more of a scrape really. So its made me think of a possible colour change. My Lupo is Jazz blue and was thinking of White, Orange or Red, what's your thoughts.
  9. 666DUB

    Quick Question

    Should be ok if they are 4 stud they will just be under the arch 4mm more than what I've got on. As for pics i would love to post some, I've tried a few times and failed miserably.
  10. 666DUB

    Quick Question

    I've got 17's on my Lupo TDI and lowered on AP coilover's with no problems' and they look great in my humble opinion. They are 17"x7" Fox FX1's ET38 4 stud with 185/35/17 Nankang NS2 tyre's. So no reason to believe they wouldn't fit an Arosa.
  11. Excellent, thanks for that, i want to go lower all round, front no problem lots of adjustment left, but rear none , and don't fancy taking the adjusters out,shorter springs should do the trick even though mine are AP's not FK's , will give Demon Tweeks a ring. Tony.
  12. What coilovers you got, and were did you get your custom rear springs and how much please.
  13. Just a quick couple of Thank you`s, firstly my 17" alloys were fine, even lowered on coilovers, but when I put 17mm spacers on the back to fill the arch`s out, they started catching, not badly but enough, so rolling was needed. A few members on here suggest a rubber mallet and heat gun, my first thought was "GULP" but I had a go, took my time and it worked, arch`s nicely rolled and no more catching. Secondly put my heater blower on the other morning, nothing except on number 4 so my first thought was dash out job, heater motor etc. So did a search on here and it was suggested the heater blower resistor was a common fault, and it was only situated on the passenger side, just under the dash. So I sent for a new resistor from Amazon cost £9.00. I fitted it and hey presto problem solved. So the arch`s cost me nowt and the heater was 9 quid, probably saving me hundreds. Thanks again, Tony.
  14. Very, very nice!!
  15. I've got my eye on some lovely Lenso BSX's in the above size's, will they fit my Lupo TDI with i presume 195/40/16 tyres. I know the arch's will need,rolling but then will they go on, i don't want to start messing with the camber,not keen on that,or would it be best to stick to 7.5x16 all round. Thanks, Tony.
  16. Yep you are right,it is what you said, it must have been me shaping like a wet weekend! had another go and did it this time,i wasn't pushing the switch in hard enough.Thanks, Tony.
  17. Yep,there is screw under the switch but as far as i can see it only remove's a little plastic cover,it doesn't seem to help. Also I've tried pushing it in and turning it clockwise,it just puts the foglights on it wont pull out of dash, any other idea's. Thanks.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.