Kiadeano

Or and the door actuator wires I got with the kit weren't long enough, so I'd check all wires will be long enough before you start, lay them out where their goin to go.

Hi, I've done this on my arosa, ill put a few pics up for u, it was a long job I had to reome some of my dash to get to and hide all the wireing, I know I wired the flashers to the hazard switch. The drivers front actuator is the most complex because this controls the other locks, the other actuators just have two wires to them, even though I installed my correctly i had a few problems with the lock actuators not pulling the lock down far enough it took a lot of adjusting, My advice is to study where your going to put everything, ie control unit and which way your guna run all wires, sorry if this isn't really helpfull but ill put some pics up if u want to show you how mine was installed.

Take bra off, they just end up catching grit and scratch paint work, plus look awful,

Whatever u choose make sure the offset is within the right tolerance,

Thought I'd reply mi sen, that tank would be the cold air feed tank mate, and the pipe that come from manifold Is for warm air into carb for really cold starts, their u go bud,

Hi I'm fitting an induction kit on arosa, I'm gunna get a engine breather filter as well, but what do I do with the hose that comes out top of manifold and connects to intake hose, also what's that little tank thing at the beginning of the intake pipe, it's got like a twist cap and a couple of wires that lead to air box, any help would be welcome.

Hi, rite my car head unit has been wired so that four speakers are running from one set of speaker wires commin from head unit/ one channel, with three others spare doin nothin. I don't really want to have to re wire the front four speakers so that they run of at least two seperate speaker outputs/ channels from the head unit. Could I just bridge another head unit speaker output into the one already been used, they should be enough resistance in four speakers to be safe?

Order by: Newest First finally got to put a pic up with dry fitted skirts, need paint and putting on

Just told him I'd have the spoiler and pay through PayPal but NOT as a gift because I was paranoid about scams and he said it was fine, and that he's a reg on lupo, so seems ok, thanks for advice everyone.

Thank you so very much and your fast reply,

Guys really need help don't wana get scammed, I've put a wanted post for a spoiler up and someone text me on my phone not on the post saying they had one for £110, lupo gti, I have PayPal so would I still be coverd if I send money to Thier PayPal account using, SEND MONEY then Thier email or Fne number, have people scammed like this before on here, just wounderd why he not put it up for sale or replied to post, please respond I'm new to this forum and think its great, thankyou. I don't mean no disrespect to anyone or the forum, like I say I think it's great.

Maybe, but maybe someone might have skills out their? And not just quit at first hurdle.

Got home today and my skirts had arrived from Germany, yippee! Couldn't wait do dry fitted them, this is when I realised I had a problem, they fit perfect in size and shape, but thiers no contact point on the underneath sill to fix them on, they wrap around the front and rear arches and also wrap over the upper door sill the full length, I was woundering I'd I should tiger seal the door sill contact and use two self tappers each end into arch trim, thankyou for reading. Ill put a pic up tomorrow of dry fit, they only took two weeks to come from Germany.

Hi peeps would a lupo gti spoiler fit a arosa mk1, I know the two piece one won't cos of the window difference, thanx any advice appreciated, Deano.

Order by: Newest First 00 HI heres the wheels before and after, what do you think. I'm also waiting for some side skirts comming from gt tuning but you dont get a fixing kit with them, so whats the best way to attach, i was going to use no 8 self tappers and those spire clips into the inside wheel arch somehow and use tiger seal, would tiger seal alone be strong enough?